The width to use for the fiducial. Typically this is 1mm.
Available Mask Shape(s):
Circle
Square
Note: Mask shape are optional. If Mask Shape is empty, or Mask Width is zero - no mask pad will be created, only the fiducial pad.
Mask Width:
The width to use for the fiducial clearance and mask pad size. Should be larger than the Fiducial Width.
Note: Mask width is optional. If Mask Shape is empty, or Mask Width is zero - no mask pad will be created, only the fiducial pad.
Center Point X, Y :
Assign the center point for the fiducial.
Relative X,Y Coordinates are supported:
You may use Relative X,Y Coordinates requires the at-sign @ (See below for examples)
X = @-1 Y = @0.25 would result in -1 (from Panel Right) and 0.25 (from Panel Bottom)
X = @0.5 Y = @-0.75 would result in 0.5 (from Panel Left) and -0.75 (from Panel Top)
Fiducial Type:
Local
Global
Panel
Note: Fiducial type is optional. This will attach a Fiducial type attribute to each Fiducial pad created - primary used when exporting ODB++, IPC-2581, and other formats that retain this information.
Layer(s):
Choose the layers you wish to have the fiducial created on.
Simon Garrison
Available Fiducial Shape(s):
Circle
Cross
Hash
Oblong
Square
Target
Fiducial Width:
The width to use for the fiducial. Typically this is 1mm.
Available Mask Shape(s):
Circle
Square
Note: Mask shape are optional. If Mask Shape is empty, or Mask Width is zero - no mask pad will be created, only the fiducial pad.
Mask Width:
The width to use for the fiducial clearance and mask pad size. Should be larger than the Fiducial Width.
Note: Mask width is optional. If Mask Shape is empty, or Mask Width is zero - no mask pad will be created, only the fiducial pad.
Center Point X, Y :
Assign the center point for the fiducial.
Relative X,Y Coordinates are supported:
You may use Relative X,Y Coordinates requires the at-sign @ (See below for examples)
X = @-1 Y = @0.25 would result in -1 (from Panel Right) and 0.25 (from Panel Bottom)
X = @0.5 Y = @-0.75 would result in 0.5 (from Panel Left) and -0.75 (from Panel Top)
Fiducial Type:
Local
Global
Panel
Note: Fiducial type is optional. This will attach a Fiducial type attribute to each Fiducial pad created - primary used when exporting ODB++, IPC-2581, and other formats that retain this information.
Layer(s):
Choose the layers you wish to have the fiducial created on.