I am trying to convert gerber file to dwg file, The gerber file is loading and i can see the image, but iam unable to export it as dwg file. May i know the reason for this?
below is my gerber file content:
G04 ================== begin FILE IDENTIFICATION RECORD ==================*
G04 Layout Name: SodaPOP_NE341-3_20130522.sip*
G04 Film Name: SM-BTM*
G04 File Format: Gerber RS274X*
G04 File Origin: Cadence Allegro 16.5-P002*
G04 Origin Date: Wed May 22 13:09:41 2013*
G04 *
G04 Layer: PIN/SOLDERMASK_BOTTOM*
G04 Layer: SUBSTRATE GEOMETRY/SOLDERMASK_BOTTOM*
G04 *
G04 Offset: (0.000 0.000)*
G04 Mirror: No*
G04 Mode: Positive*
G04 Rotation: 0*
G04 FullContactRelief: No*
G04 UndefLineWidth: 0.000*
G04 ================== end FILE IDENTIFICATION RECORD ====================*
If you are having any troubles, please let me know the following:
1. What version of ACE Translator are you using? 2. What OS are you using? Windows XP, Vista, 7, Linux? Note: DWG is not available on Linux. Linux users should use DXF instead. 3. Are there any error messages you receive?
Thanks!
C
Chandrashekhar
said
over 9 years ago
Hi,
Still i am unable to generate DWG file. I don't even get any error message but the DWG is not created in the specified folder.
Iam using ACE 3000 V7 Translator version 7.2.9 and my OS is Windows XP.
Thanks & Regards, Chandrashekhar
N
Numerical Support Team
said
over 9 years ago
Converting Gerber to DWG is very easy with ACE 3000 (as shown by my tutorial movie above). My only guess is that perhaps you may not have a registered license; or you have a limited demo license that doesn't allow exporting. I would recommend contacting whomever gave you the license and determine which type you have.
Chandrashekhar
I am trying to convert gerber file to dwg file, The gerber file is loading and i can see the image, but iam unable to export it as dwg file. May i know the reason for this?
below is my gerber file content:
G04 ================== begin FILE IDENTIFICATION RECORD ==================*
G04 Layout Name: SodaPOP_NE341-3_20130522.sip*
G04 Film Name: SM-BTM*
G04 File Format: Gerber RS274X*
G04 File Origin: Cadence Allegro 16.5-P002*
G04 Origin Date: Wed May 22 13:09:41 2013*
G04 *
G04 Layer: PIN/SOLDERMASK_BOTTOM*
G04 Layer: SUBSTRATE GEOMETRY/SOLDERMASK_BOTTOM*
G04 *
G04 Offset: (0.000 0.000)*
G04 Mirror: No*
G04 Mode: Positive*
G04 Rotation: 0*
G04 FullContactRelief: No*
G04 UndefLineWidth: 0.000*
G04 ================== end FILE IDENTIFICATION RECORD ====================*
%FSLAX35Y35*MOMM*%
%IR0*IPPOS*OFA0.00000B0.00000*MIA0B0*SFA1.00000B1.00000*%
%ADD16R,.675X1.4*%
%ADD20R,1.092X.932*%
%ADD24R,.514X1.098*%
%ADD19R,.81X1.198*%
%ADD15R,.3X.3*%
%ADD10R,.35X.35*%
%ADD12R,.3X.35*%
%ADD11R,.35X.3*%
%ADD23R,.514X.4*%
%ADD22R,.45X.832*%
%ADD14R,.57X.39*%
%ADD21R,.45X.885*%
%ADD18R,.81X.885*%
%ADD13R,.477X.345*%
%AMMACRO17*
4,1,5,-.144,.466,
.244,.466,
.244,-.466,
-.244,-.466,
-.244,.366,
-.144,.466,
0.0*
%
%ADD17MACRO17*%
%LPD*%
G75*
G54D10*
X-302500Y-352500D03*
Y352500D03*
X302500Y-352500D03*
Y352500D03*
G54D11*
X-302500Y-300000D03*
Y-250000D03*
Y-200000D03*
Y-150000D03*
Y-100000D03*
Y-50000D03*
Y0D03*
Y50000D03*
Y100000D03*
Y150000D03*
Y200000D03*
Y250000D03*
Y300000D03*
X-247500Y-300000D03*
Y-250000D03*
Y-200000D03*
Y-150000D03*
Y-100000D03*
Y-50000D03*
Y0D03*
Y50000D03*
Y100000D03*
Y150000D03*
Y200000D03*
X247500Y-300000D03*
Y-200000D03*
Y-250000D03*
Y-150000D03*
Y-50000D03*
Y-100000D03*
Y0D03*
Y100000D03*
Y50000D03*
Y200000D03*
Y150000D03*
Y250000D03*
X302500Y-300000D03*
Y-200000D03*
Y-250000D03*
Y-150000D03*
Y-50000D03*
Y-100000D03*
Y0D03*
Y100000D03*
Y50000D03*
Y200000D03*
Y150000D03*
Y250000D03*
Y300000D03*
G54D20*
X19000Y126500D03*
G54D21*
X122500Y-207500D03*
G54D12*
X-200000Y-352500D03*
X-250000D03*
X-200000Y297500D03*
X-250000Y352500D03*
X-200000D03*
X-150000Y-352500D03*
Y352500D03*
X-50000Y-297500D03*
Y-352500D03*
X-100000D03*
X-50000Y297500D03*
X-100000Y352500D03*
X-50000D03*
X0Y-297500D03*
Y-352500D03*
Y297500D03*
Y352500D03*
X100000Y-297500D03*
X50000D03*
X100000Y-352500D03*
X50000D03*
Y297500D03*
X100000D03*
X50000Y352500D03*
X100000D03*
X150000Y-297500D03*
X200000Y-352500D03*
X150000D03*
Y297500D03*
Y352500D03*
X200000D03*
X250000Y-352500D03*
Y352500D03*
G54D13*
X-132000Y-234500D03*
G54D22*
X122500Y-102000D03*
G54D14*
X-136500Y-162500D03*
G54D23*
X119300Y30000D03*
X119600Y220000D03*
G54D15*
X-155300Y25000D03*
X-140300Y75000D03*
G54D24*
X119300Y125000D03*
G54D16*
X-55000Y-181750D03*
G54D17*
X-80000Y126500D03*
G54D18*
X40000Y-207500D03*
G54D19*
Y-84000D03*
M02*