Start a new topic

NC Mill export, invalid entry

NC Mill export, invalid entry

The NC Mill export inserts a strange retract & plunge operation with a "G00XY" line, see line 38 & 60
[QUOTE]
M48
INCH,LZ
VER,1
FMAT,2
T01C0.0236
T02C0.0320
T03C0.0374
T04C0.0400
T05C0.0470
T06C0.0906
T07C0.1260
T08C0.0937
T09C0.1181
T10C0.0236
T11C0.0240
T12C0.0320
T13C0.0360
T14C0.0520
DETECT,ON
ATC,ON
%
G90
T08
G00X0023606Y0146896
G41
M15
G01X0041669
Y0081147
X0024527
M16
G40
G00X002194
G41
M15
G01X0003677
M16
G40
G00XY
G41
M15
G01Y0146896
X0021019
M16
G40
T08
G00X0023485Y0074455
G41
M15
G01X0041548
Y0008706
X0024405
M16
G40
G00X0021818
G41
M15
G01X0003556
M16
G40
G00XYG41
M15
G01Y0074455
X0020898
M16
G40
T08
G00X0023575Y015598
G41
M15
G01X0004405
Y0196334
M16
G40
G00X002542
G41
M15
G01X0044759
Y015598
X0026162
M16
G40
G00X0004405Y0196334
G41
M15
G01X0022833
M16
G40
T08
G00X0066413Y015598
G41
M15
G01X0047244
Y0196334
M16
G40
G00X0068258
G41
M15
G01X0087598
Y015598
X0069
M16
G40
G00X0047244Y0196334
G41
M15
G01X0065671
M16
G40
T08
G00X0062052Y0101452
G41
M15
G01X0042883
Y0141806
M16
G40
G00X0063898
G41
M15
G01X0083237
Y0101452
X0064639
M16
G40
G00X0042883Y0141806
G41
M15
G01X0061311
M16
G40
T08
G00X0062052Y0055118
G41
M15
G01X0042883
Y0095472
M16
G40
G00X0063898
G41
M15
G01X0083237
Y0055118
X0064639
M16
G40
G00X0042883Y0095472
G41
M15
G01X0061311
M16
G40
T08
G00X0083237Y0029012
G41
M15
G01Y0009842
X0042883
M16
G40
G00Y0030857
G41
M15
G01Y0050196
X0083237
Y0031599
M16
G40
G00X0042883Y0009842
G41
M15
G01Y002827
M16
G40
T08
G00X0101896Y0049615
G41
M15
G01X0117314Y0049606
Y0009842
X0102248Y0009851
M16
G40
G00X0084568Y0009862
G41
M15
G01Y0049625
X0099309Y0049616
M16
G40
G00X0099661Y0009853
G41
M15
G01X0084568Y0009862
M16
G40
T08
G00X0101896Y009432
G41
M15
G01X0117314Y0094311
Y0054547
X0102248Y0054556
M16
G40
G00X0084568Y0054567
G41
M15
G01Y009433
X0099309Y0094321
M16
G40
G00X0099661Y0054557
G41
M15
G01X0084568Y0054567
M16
G40
T08
G00X0101896Y0140083
G41
M15
G01X0117314Y0140074
Y010031
X0102248Y0100319
M16
G40
G00X0084568Y010033
G41
M15
G01Y0140093
X0099309Y0140085
M16
G40
G00X0099661Y0100321
G41
M15
G01X0084568Y010033
M16
G40
M30
[/QUOTE]

Thanks for your post. I believe G00 turns the routing mode on and the drilling mode off.  If possible, please submit a sample workspace file (*.wrk), to support@numericalinnovations.com   and we will test exactly what is the cause; and perhaps make an option to suppress the output.

Note:  To save a workspace file, load your design in FAB 3000 and then go to menu: File | Save Workspace...

Login or Signup to post a comment